ITKeyword,专注技术干货聚合推荐

注册 | 登录

(1)安装Arch系统 - 树莓派Raspberry Pi - Arch Linux(转载)

hustsselbj 分享于 2017-04-01

推荐:在ARM设备(树莓派、香蕉派)上为Arch Linux配置yaourt

在PC上为Arch Linux配置yaourt没什么好说的,根据Wiki一步一步来就可以。但是在我的Banana Pi上,配置yaourt遇到了一些问题,卡了好久才配置好。下面就详述一下

2019阿里云双11返场狂欢继续,
地址https://www.aliyun.com/1111/2019/home

直接复制过来的英文操作步骤,非常简单明了,在树莓派B+上面安装Arch Linux ARM,不想装官方推荐的Debian系统的可以参考本文。

Raspberry Pi
SD Card Creation Replace sdX in the following instructions with the device name for the  SD card as it appears on your computer. 首先用读卡器或者插在手机中,连接到电脑,进行分区和文件复制。
1. Start fdisk to partition the SD card: fdisk /dev/sdX 2. At the fdisk prompt, delete old partitions and create a new one:
1. Type o. This will clear out any partitions on the drive. 2. Type p to list partitions. There should be no partitions left. 3. Type n, then p for primary,  1 for the first partition on the drive, press ENTER to accept the default first sector, then type  +100M for the last sector. 4. Type t, then c to set the first partition to type  W95 FAT32 (LBA). 5. Type n, then p for primary,  2 for the second partition on the drive, and then press ENTER twice to accept the default first and last sector. 6. Write the partition table and exit by typing w.
3. Create and mount the FAT filesystem: mkfs.vfat /dev/sdX1 mkdir boot mount /dev/sdX1 boot 4. Create and mount the ext4 filesystem: mkfs.ext4 /dev/sdX2 mkdir root mount /dev/sdX2 root 5. Download and extract the root filesystem (as root, not via sudo): wget http://archlinuxarm.org/os/ArchLinuxARM-rpi-latest.tar.gz bsdtar -xpf ArchLinuxARM-rpi-latest.tar.gz -C root sync 6. Move boot files to the first partition: mv root/boot/* boot 7. Unmount the two partitions: umount boot root 8. Insert the SD card into the Raspberry Pi, connect ethernet, and apply 5V power. 9. Use the serial console or SSH to the IP address given to the board by your router. The  default root password is 'root'.

archlinux软件包管理pacman,pacman -S --needed xxx安装。更换软件源vi /etc/pacman.d/sourcelist 添加Server = http://mirrors.hustunique.com/archlinuxarm/armv6h/$repo 然后pacman -Sy更新本地数据库,-u更新软件


推荐:一个树莓派raspberry pi 操作系统开发网站

包含很多教程,一步步实现属于自己的树莓派os http://www.cl.cam.ac.uk/projects/raspberrypi/tutorials/os/downloads.html 其实树莓派还有很多我们所说的裸机开

直接复制过来的英文操作步骤,非常简单明了,在树莓派B+上面安装Arch Linux ARM,不想装官方推荐的Debian系统的可以参考本文。 Raspberry Pi SD Card Creation Replace sdX in the following in

相关阅读排行


用户评论

游客

相关内容推荐

最新文章

×

×

请激活账号

为了能正常使用评论、编辑功能及以后陆续为用户提供的其他产品,请激活账号。

您的注册邮箱: 修改

重新发送激活邮件 进入我的邮箱

如果您没有收到激活邮件,请注意检查垃圾箱。